Caution / Notice / Hint

NOTE:

Inspect the fuses for circuits related to this system before performing the following procedure.
The power window control system uses the LIN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Troubleshoot the power window control system after confirming that the communication system is functioning properly.
Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2013 - ]
If the power window regulator motor assembly (for driver door) has been replaced with a new one, initialize the power window control system.
Refer to INITIALIZATION [08/2013 - 08/2016]
When the ECU determines that the power window regulator motor assembly (for driver door) has a malfunction, DTC B2311 is stored.

HINT:

If the pulse sensor built into the power window regulator motor assembly (for driver door) is malfunctioning, the power window control system enters fail-safe mode. The remote up and down function cannot be operated during fail-safe mode. However, the power window can be closed by holding the power window regulator master switch assembly at the auto up position, and opened manually by pushing down the power window regulator master switch assembly.