DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0129: Lost Communication with Brake System Control Module; DTC U0131: Lost Communication with Power Steering Control Module; DTC U0142: Lost Communication with Body Control Module "B"; DTC U0151: Lost Communication with Restraints Control Module; DTC U023A: Lost Communication with Front Camera Module [08/2016 - ]: Description
The combination meter assembly communicates with the ECM, brake actuator assembly (skid control ECU), power steering ECU assembly, main body ECU (multiplex network body ECU), airbag sensor assembly and pre-collision city sensor* via CAN communication.
- *: w/ Pre-collision System
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Memory | Note |
|---|---|---|---|---|---|
| U0100 | Lost Communication with ECM / PCM "A" | When IG voltage is 9.5 V or more and the following condition is detected:
|
|
DTC stored | - |
| U0129 | Lost Communication with Brake System Control Module | When IG voltage is 9.5 V or more and the following condition is detected:
|
|
DTC stored | - |
| U0131 | Lost Communication with Power Steering Control Module | When IG voltage is 9.5 V or more and the following condition is detected:
|
|
DTC stored | - |
| U0142 | Lost Communication with Body Control Module "B" | When IG voltage is 9.5 V or more and the following condition is detected:
|
|
DTC stored | - |
| U0151 | Lost Communication with Restraints Control Module | When IG voltage is 9.5 V or more and the following condition is detected:
|
|
DTC stored | - |
| U023A | Lost Communication with Front Camera Module | When IG voltage is 9.5 V or more and the following condition is detected:
|
|
DTC stored | w/ Pre-collision System |