Caution / Notice / Hint
NOTE:
- w/ Pre-collision City Heater:
Inspect the fuses for circuits related to this system before performing the following procedure.
- When replacing the pre-collision city sensor, replace it with a new one and be sure to perform initialization. If a pre-collision city sensor which was installed to another vehicle is used, the information stored in the pre-collision city sensor will not match the information from the vehicle and, as a result, a DTC may be stored.
- If the pre-collision city sensor has been replaced, or the windshield glass has been replaced or removed/installed, be sure to perform Pre-collision City Sensor Optical Axis Learning.
Refer to ADJUSTMENT [08/2016 - ]