Jam Protection Function does not Operate [12/2013 - ]: Procedure

1. Initialize the power window regulator motor assembly (applicable location).

   Refer to INITIALIZATION [12/2013 - ]

NEXT 

1. Check if the power window auto up and down function operates normally.

   Refer to OPERATION CHECK [12/2013 - ]

   OK

   Auto up and down function is normal.

   Result

   Proceed to
   OK
   NG

Result:  2

NG 

GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table). Refer to  PROBLEM SYMPTOMS TABLE [12/2013 - ] 

Result:  1

OK 

See step  3

1. Check if the jam protection function operates normally for the applicable power window.

   HINT: 

   The jam protection function will not operate within 4 mm (0.157 in.) of the fully closed position.

   OK

   Jam protection function operates normally.

   Result

   Result	Proceed to
   OK	A
   NG (Driver door power window)	B
   NG (Front passenger door power window)

Result:  1

A 

END (PROBLEM DUE TO INITIALIZATION FAILURE) 

Result:  2

B 

REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR DRIVER DOOR OR FRONT PASSENGER DOOR). Refer to  REMOVAL [12/2013 - ]