LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2017 >> Highlander LE Plus, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Power Window Control System (Jam Protection Front Windows) - Diagnostic Codes & Symptom Tests - (Except Hybrid) >> POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on Front Door Windows) >> Symptom Tests >> Remote Up / Down Function does not Operate [12/2013 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remote Up / Down Function does not Operate [12/2013 - ]: Procedure

  1. CHECK POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (WINDOW LOCK SWITCH) 
    1. Turn the window lock switch off and operate the switches on the power window regulator master switch assembly. Check that the remote up and down function operates normally.

      OK

      Remote up and down function operates normally.

      Result

      Result Proceed to
      OK A
      NG (Front passenger door power window remote up and down function does not operate) B
      NG (Rear LH door power window remote up and down function does not operate) C
      NG (Rear RH door power window remote up and down function does not operate)

    Result:  1

    END 

    Result:  3

    See step  4

    Result:  2

    See step  2

  2. READ VALUE USING TECHSTREAM (MAIN BODY) 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Main Body / Data List.
    5. Read the Data List according to the display on the Techstream.

      Body Electrical > Main Body > Data List 

      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Communication P-Door Motor Connection status between power window regulator motor assembly (for front passenger door) and main body ECU (multiplex network body ECU) STOP or OK STOP: Communication stopped
      OK: Normal communication
      -
      Communication Master SW Connection status between power window regulator master switch assembly and main body ECU (multiplex network body ECU) STOP or OK STOP: Communication stopped
      OK: Normal communication
      -

      Body Electrical > Main Body > Data List 

      Tester Display
      Communication P-Door Motor
      Communication Master SW

      OK

      On the Techstream screen, OK is displayed.

      Result

      Proceed to
      OK
      NG

    Result:  2

    NG 

    GO TO LIN COMMUNICATION SYSTEM (Proceed to How to Proceed with Troubleshooting). Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [12/2013 - ] 

    Result:  1

    OK 

    See step  3

  3. READ VALUE USING TECHSTREAM (MASTER SWITCH) 
    1. Enter the following menus: Body Electrical / Master Switch / Data List.
    2. Read the Data List according to the display on the Techstream.

      Body Electrical > Master Switch > Data List 

      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      P Door P/W Auto SW Front passenger door power window auto up and down switch signal OFF or ON OFF: Front passenger door power window auto switch not being operated
      ON: Front passenger door power window auto switch being operated
      -
      P Door P/W Up SW Front passenger door power window manual up switch signal OFF or ON OFF: Front passenger door power window manual up switch not being operated
      ON: Front passenger door power window manual up switch being operated
      -
      P Door P/W Down SW Front passenger door power window manual down switch signal OFF or ON OFF: Front passenger door power window manual down switch not being operated
      ON: Front passenger door power window manual down switch being operated
      -
      Window Lock Switch Status Window lock switch signal OFF or ON OFF: Window lock switch UNLOCK position
      ON: Window lock switch LOCK position
      -

      Body Electrical > Master Switch > Data List 

      Tester Display
      P Door P/W Auto SW
      P Door P/W Up SW
      P Door P/W Down SW
      Window Lock Switch Status

      OK

      On the Techstream screen, ON or OFF is displayed accordingly.

      Result

      Proceed to
      OK
      NG

    Result:  1

    OK 

    REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR FRONT PASSENGER DOOR). Refer to  REMOVAL [12/2013 - ] 

    Result:  2

    NG 

    REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY. Refer to  REMOVAL [12/2013 - ] 

  4. CHECK POWER WINDOW CONTROL SYSTEM (USING REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY) 
    1. Check the operation of the rear LH and rear RH door power windows by using the rear power window regulator switch assembly (for LH door or RH door).

      Result

      Result Proceed to
      • Rear LH and rear RH door power windows operate normally by using the rear power window regulator switch assembly (for LH door or RH door)
      • Rear LH and rear RH door power windows do not operate by using the rear power window regulator switch assembly (for LH door or RH door)
      A
      Only rear LH door power window does not operate using the rear power window regulator switch assembly (for LH door) B
      Only rear RH door power window does not operate using the rear power window regulator switch assembly (for RH door) C

    Result:  1

    REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY. Refer to  REMOVAL [12/2013 - ] 

    Result:  3

    GO TO OTHER PROBLEM (Rear Power Window LH does not Operate with Rear Power Window Switch LH). Refer to  Rear Power Window LH does not Operate with Rear Power Window Switch LH [12/2013 - ]  

    Result:  4

    GO TO OTHER PROBLEM (Rear Power Window RH does not Operate with Rear Power Window Switch RH). Refer to  Rear Power Window RH does not Operate with Rear Power Window Switch RH [12/2013 - ]