LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2017 >> Highlander LE Plus, AWD >> Repair and Diagnosis (Single Page) >> Electrical >> Starter >> Stop And Start System - Cancel Switch Assembly (Service Information) (Except Hybrid) >> Stop And Start System Cancel Switch Assembly >> Installation [11/2016 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation [11/2016 - ]: Procedure

  1. INSTALL ECO RUN CANCEL SWITCH ASSEMBLY 
    1. Engage the 2 claws to install the eco run cancel switch assembly.
  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 32

  3. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 33

  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 34

  5. INSTALL INSTRUMENT PANEL FINISH PANEL END LH 

    Refer to PROCEDURE - Step 35

  6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH 

    Refer to PROCEDURE - Step 53

  7. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 54

  8. INSTALL FRONT DOOR SCUFF PLATE LH 

    Refer to PROCEDURE - Step 55

scientia non olet · About LEMON Manuals