TPMS Reset Procedures: Notes

NOTE: The system will need to be initialized when tires are replaced with tires of different pressures, tire pressure sensor and/or tire pressure monitor ECU are replaced. See INITIALIZING TIRE PRESSURE MONITOR SYSTEM . When a tire pressure sensor and/or tire pressure monitor ECU are replaced, the sensor ID must be memorized by the tire pressure monitor ECU prior to system initialization. See TIRE PRESSURE SENSOR REGISTRATION .

When the tire pressure warning light does not go off, or when it comes on during driving, check tire pressure. Adjust tire pressures to specification. Check that warning light goes out after a few minutes.

NOTE: If the negative battery terminal is disconnected, initialize the following power systems after the terminal is reconnected: window control system, back door system, sliding door system and the moon roof. Refer to owner's manual or appropriate manufacturer service information.