DTC U0073: Sending Malfunction (Navigation to APGS); DTC U0100: Engine ECU Communication; DTC U0126: Steering Sensor Communication; DTC U0129: VSC(ECB)ECU Communication; DTC U0140: Lost Communication with Body Control Module; DTC U0155: Meter ECU Communication; DTC U0164: Air Conditioner ECU Communication; DTC U0198: Lost Communication with Telematic Control Module; DTC U1110: Clearance Sonar ECU Communication [08/2015 - 08/2016]: Procedure
- CLEAR DTC
- Clear the DTCs (Refer to DTC CHECK / CLEAR [08/2015 - 08/2016] ).
Result:
NEXT
See step 2
- CHECK DTC (CAN COMMUNICATION SYSTEM)
- Recheck for DTCs and check if the same DTCs are output again (Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - ]
).
OK
No DTCs are output.
Result:
OK
USE SIMULATION METHOD TO CHECK
(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - 08/2017] )
Result:
NG
GO TO CAN COMMUNICATION SYSTEM
(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - ] )
- Recheck for DTCs and check if the same DTCs are output again (Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - ]
).