DTC U0416: Invalid Data Received from Vehicle Dynamics Control Module [08/2015 - ]: Description
This DTC is output if a wheel speed malfunction signal is sent from the skid control ECU (master cylinder solenoid).
| DTC No. |
DTC Detection Condition
- Diagnosis Condition
- Malfunction Status
- Malfunction Time
- Other
|
Trouble Area |
| U0416 |
- Engine switch turned on (IG) (3 seconds elapse after engine switch is turned on (IG))
- Wheel speed sensor malfunction signals from skid control ECU are received
- 0.06 seconds or more (malfunction signal received 1 or more times) when transfer is switching between high and low, or center differential is switching between free and lock
- 1 trip detection logic
|
- CAN communication system
- Vehicle stability control system
|