LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2017 >> Mirai >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Can Communication System - Circuit Tests >> Can Communication System >> Integration Control and Panel Assembly Communication Stop Mode [11/2018 - ] >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Integration Control and Panel Assembly Communication Stop Mode [11/2018 - ]: Description

Detection Item Symptom Trouble Area
Integration Control and Panel Assembly Communication Stop Mode Either condition is met:
  • "Driver Mirror" is not displayed on the CAN Bus Check screen of the Techstream

    Refer to PROBLEM SYMPTOMS TABLE [11/2018 - ]

  • Communication system DTCs (DTCs that start with U) that correspond to "Integration Control and Panel Assembly Communication Stop Mode" in "DTC Combination Table" are output

    Refer to DIAGNOSIS SYSTEM [11/2018 - ]

  • Integration control and panel assembly branch line or connector
  • Power source circuit of integration control and panel assembly
  • Integration control and panel assembly ground circuit
  • Integration control and panel assembly