Caution / Notice / Hint

NOTE:

When replacing the forward recognition camera, replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.
When the forward recognition camera is replaced with a new one or the windshield glass is replaced or removed/installed, make sure to perform beam axis adjustment for the forward recognition camera and clear the vehicle control history for each system.
HINT:

Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.

One Time Recognition: Refer to ADJUSTMENT (ONE TIME RECOGNITION) [11/2018 - ]

Sequential Recognition: Refer to ADJUSTMENT (SEQUENTIAL RECOGNITION) [11/2018 - ]