DTC P060B-134: Internal Control Module A/D Processing Performance; DTC P060B-135: Internal Control Module A/D Processing Performance; DTC P060B-570: Internal Control Module A/D Processing Performance [06/2015 - ]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Powertrain / FC / Trouble Codes.
5. Clear the DTCs.

   Powertrain > FC > Clear DTCs 

6. Turn the power switch off and wait for 3 minutes or more.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  2

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG) and wait for 5 seconds or more.
3. Turn the Techstream on.
4. Enter the following menus: Powertrain / FC / Trouble Codes.
5. Check for DTCs.

   Result

   Result	Proceed to
   DTC P060B is output	A
   Other DTCs are output	B
   DTCs are not output	C

6. Turn the power switch off.

Result: 

A 

REPLACE FC CONTROL ECU. Refer to  REMOVAL [06/2015 - 11/2018]  , or refer to  REMOVAL [11/2018 - ] 

Result: 

B 

GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [06/2015 - 11/2018]  , or refer to  DIAGNOSTIC TROUBLE CODE CHART [11/2018 - ] 

Result: 

C 

CHECK FOR INTERMITTENT PROBLEMS. Refer to  CHECK FOR INTERMITTENT PROBLEMS [06/2015 - ]