LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2017 >> Mirai >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> Occupant Classification System - Diagnostics - Introduction >> Occupant Classification System >> How To Proceed With Troubleshooting [06/2015 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

How To Proceed With Troubleshooting [06/2015 - ]: Procedure

  1. VEHICLE BROUGHT TO WORKSHOP 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  2

  2. CUSTOMER PROBLEM ANALYSIS 
    1. Confirm problem symptoms.

      Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2015 - 11/2018] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2018 - ]

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  3

  3. INSPECT AUXILIARY BATTERY 
    1. Measure the auxiliary battery voltage.

      Standard voltage

      11 to 14 V (IG OFF)

      If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  4

  4. PASSENGER AIRBAG ON/OFF INDICATOR CHECK 
    1. Proceed to Diagnosis System.

      Refer to DIAGNOSIS SYSTEM [06/2015 - ] 

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  5

  5. CHECK DTC (Present and History DTCs)* 
    1. Proceed to DTC Check / Clear.

      Refer to DTC CHECK / CLEAR [06/2015 - ] 

      Body Electrical > Occupant Detection > Trouble Codes 

      Result

      Result  Proceed to
      DTC is output A
      DTC is not output B

    Result: 

    B 

    GO TO PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE [06/2015 - ]  

    Result: 

    A 

    See step  6

  6. DIAGNOSTIC TROUBLE CODE CHART 
    1. Proceed to Diagnostic Trouble Code Chart.

      Refer to DIAGNOSTIC TROUBLE CODE CHART [06/2015 - ] 

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  7

  7. CIRCUIT INSPECTION* 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  8

  8. REPAIR 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    See step  9

  9. CLEAR DTCS (Present and Past DTCs)* 
    1. Proceed to DTC Check / Clear.

      Refer to DTC CHECK / CLEAR [06/2015 - ] 

      Body Electrical > Occupant Detection > Clear DTCs 

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  10

  10. CHECK DTC* 
    1. Proceed to DTC Check / Clear.

      Refer to DTC CHECK / CLEAR [06/2015 - ] 

      Body Electrical > Occupant Detection > Trouble Codes 

      Result

      Result  Proceed to
      DTC is not output A
      DTC is output B

    Result: 

    B 

    GO TO DIAGNOSTIC TROUBLE CODE CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [06/2015 - ] 

    Result: 

    A 

    See step  11

  11. CONFIRM SIMULATION 
    1. Check the passenger airbag ON/OFF indicator condition.

      Result

      Result Proceed to
      Passenger airbag ON/OFF indicator operates normally A
      Passenger airbag ON/OFF indicator ("OFF") and SRS warning light come on B

    Result: 

    B 

    GO TO AIRBAG SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [06/2015 - ] 

    Result: 

    A 

    See step  12

  12. CONFIRMATION TEST 

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    END 

scientia non olet · About LEMON Manuals