LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2017 >> Mirai >> Repair and Diagnosis (Single Page) >> Restraints >> Restraints Control Systems >> Pre-Collision System - Diagnostic Codes & Circuit Tests >> Pre-Collision System >> DTC U0418-81: Invalid Data Received from Brake System Control Module Invalid Serial Data Received [11/2018 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U0418-81: Invalid Data Received from Brake System Control Module Invalid Serial Data Received [11/2018 - ]: Procedure

  1. CHECK FOR DTCs 
    1. Using the Techstream, check for electronically controlled brake system DTCs.

      Chassis > ABS/VSC/TRAC > Trouble Codes 

      HINT: 

      If DTC U0418-81 is output by the pre-collision system, perform troubleshooting for the electronically controlled brake system.

      Result

      Result Proceed to
      DTCs are not output A
      DTCs are output B

    Result: 

    REPLACE FORWARD RECOGNITION CAMERA. Refer to  REMOVAL [11/2018 - ] 

    Result: 

    GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [06/2015 - ]