Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory [11/2015 - ]: Procedure

1. Check radio condition.

   Result

   Result	Proceed to
   Broadcast cannot be selected.	A
   Broadcast can be selected, but selection cannot be memorized.	B

Result: 

A 

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE 

Refer to PROBLEM SYMPTOMS TABLE [11/2015 - ] )

Result: 

B 

See step  2

1. Check the number of preset channels.

   OK

   36 channels have already been preset.

Result: 

OK 

END (ONLY 36 CHANNELS CAN BE PRESET) 

Result: 

NG 

See step  3

1. Check if the auxiliary battery was replaced.

   OK

   Auxiliary battery was not replaced.

Result: 

OK 

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE 

Refer to PROBLEM SYMPTOMS TABLE [11/2015 - ] )

Result: 

NG 

See step  4

1. Check if the preset channels that have been cleared can be added into memory again.

   OK

   Preset channels can be added into memory.

Result: 

OK 

END 

Result: 

NG 

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE 

Refer to PROBLEM SYMPTOMS TABLE [11/2015 - ] )