Check For Intermittent Problems [11/2015 - ]
- CHECK FOR INTERMITTENT PROBLEMS
HINT:
A momentary interruption (open circuit) in the connectors and/or wire harnesses between the sensors and ECUs can be detected using the Data List function of the Techstream.
- Turn the ignition switch off.
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON (IG).
- Turn the Techstream on.
- Follow the directions on the Techstream to display the Data List and select areas where momentary interruptions should be monitored.
HINT:
- A momentary interruption (open circuit) cannot be detected for 3 seconds after the ignition switch is turned to ON (IG) (initial check).
- If Error remains displayed for one of the items on the Techstream, check for continuity between the ECU and the item for which Error is displayed.
- If a momentary interruption occurs and Error is displayed on the Techstream, Error will remain displayed on the Techstream for 1 second after the circuit returns to normal.
ABS/VSC/TRACTester Display Measurement Item/Range Normal Condition Diagnostic Note FR Speed Open Front speed sensor RH open detection / Error or Normal Error: Momentary interruption
Normal: Normal- FL Speed Open Front speed sensor LH open detection / Error or Normal Error: Momentary interruption
Normal: Normal- RR Speed Open Rear speed sensor RH open detection / Error or Normal Error: Momentary interruption
Normal: Normal- RL Speed Open Rear speed sensor LH open detection / Error or Normal Error: Momentary interruption
Normal: Normal- Yaw Rate Open Yaw rate sensor open detection / Error or Normal Error: Momentary interruption
Normal: Normal- Deceleration Open Acceleration sensor open detection / Error or Normal Error: Momentary interruption
Normal: Normal- Steering Open Steering angle sensor open detection / Error or Normal Error: Momentary interruption
Normal: Normal- Master Cylinder Open Regulator pressure sensor open detection / Error or Normal Error: Momentary interruption
Normal: Normal- Stroke Open Brake pedal stroke sensor assembly open detection / Error or Normal Error: Momentary interruption
Normal: Normal- FR Wheel Cylinder Open Wheel cylinder pressure sensor open detection / Error or Normal Error: Momentary interruption
Normal: Normal- Accumulator Open Accumulator pressure sensor open detection / Error or Normal Error: Momentary interruption
Normal: Normal- HV Communication Open Hybrid vehicle communication open detection / Error or Normal Error: Momentary interruption
Normal: Normal- - While observing the screen, gently jiggle the connectors or wire harnesses between the ECUs and sensors, or between ECUs.
OK
Normal is displayed.
HINT:
If the display changes, this indicates that there has been a momentary interruption (open circuit) in the connector and/or wire harness. In this case, repair or replace the connectors and/or wire harnesses as one of them is faulty.