DTC C1AA0: Front Camera Module Circuit [11/2015 - 06/2017]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Chassis / PCS/LDA/RSA/LVN / Trouble Codes.
5. Check for DTCs (Refer to DTC CHECK / CLEAR [11/2015 - ] ).
   RESULT
   
   

   Result	Proceed to
   DTC C1AA0 is output	A
   DTC C1AA0 is not output	B

Result: 

B 

USE SIMULATION METHOD TO CHECK 

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2015 - ] )

Result: 

A 

See step  2

1. Replace the pre-collision city sensor (Refer to REMOVAL [11/2015 - ] ).
2. Perform Pre-collision City Sensor Learning (Refer to ADJUSTMENT [11/2015 - ] ).

NEXT 

END