DTC C1A47: Steering Angle Sensor [11/2015 - ]: Description
The pre-collision city sensor receives steering angle information from the steering sensor. If the pre-collision city sensor detects a steering sensor malfunction, DTC C1A47 is stored.
| DTC No. |
DTC Detection Condition |
Trouble Area |
| C1A47 |
Both of the following conditions are met:
- All of the following conditions are met:
- 3 seconds have elapsed since the power switch was turned on (IG).
- The auxiliary battery voltage is 10 V or more for 3 seconds or more.
- All of the following conditions are met for 1 second or more:
- The vehicle is being driven at 50 km/h (32 mph) or more.
- Communication between the pre-collision city sensor and steering sensor (spiral cable with sensor sub-assembly) is normal.
- The pre-collision city sensor receives a steering sensor (spiral cable with sensor sub-assembly) malfunction signal from the steering sensor (spiral cable with sensor sub-assembly).
|
- Electronically controlled brake system
- Steering sensor (Spiral cable with sensor sub-assembly)
- Pre-collision city sensor
|