DTC P2610-29: ECM/PCM Engine Off Timer Performance Signal Invalid; DTC P2610-93: ECM/PCM Engine Off Timer Performance No Operation [09/2016 - ]: Procedure

1. Replace the ECM.

   Refer to REMOVAL [09/2016 - 07/2020] , or refer to REMOVAL [07/2020 - ]

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  2

1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Clear the DTCs.

   Powertrain > Engine > Clear DTCs 

5. Turn the power switch off and wait for at least 30 seconds.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  3

1. Drive the vehicle in accordance with the driving pattern described in Confirmation Driving Pattern.
2. Enter the following menus: Powertrain / Engine / Trouble Codes / Pending.

   Powertrain > Engine > Trouble Codes 

3. If no pending DTCs are output, the repair has been successfully completed.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

END