Installation [09/2016 - ]: Procedure

1. Install the No. 2 ECM bracket to the ECM with the 2 screws.

   Torque: 4.5 N*m (46 kgf*cm, 40 in.*lbf) 

1. Install the No. 1 ECM bracket to the ECM with the 2 screws.

   Torque: 4.5 N*m (46 kgf*cm, 40 in.*lbf) 

1. Install the ECM with the bolt and nut.

   Bolt 

   Torque: 13 N*m (133 kgf*cm, 10 ft.*lbf) 

   Nut 

   Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) 

   NOTE:

   If the ECM has been struck or dropped, replace it.

2. Install the engine wire to the No. 1 ECM bracket with the bolt.

   Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) 

3. Engage the 2 clamps.
4. Connect the 2 ECM connectors and lower the 2 levers.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NOTE:

   • When connecting the ECM connectors, make sure that the connecting parts of the ECM connectors are free of dirt, water or other foreign matter.
   • Be sure to securely connect the ECM connectors.

Refer to PROCEDURE - Step 2 [09/2016 - 05/2019] , or refer to PROCEDURE - Step 2 [05/2019 - ]

Refer to INITIALIZATION [09/2016 - 05/2019] , or refer to INITIALIZATION [05/2019 - 07/2020] , or refer to INITIALIZATION [07/2020 - ]