LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2017 >> Prius Three >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Wireless Door Lock Control System - Diagnostics - Introduction >> Wireless Door Lock Control System >> Customize Parameters [11/2017 - 08/2019] >> Customize Parameters [11/2017 - 08/2019]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters [11/2017 - 08/2019]

  1. CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM 

    HINT: 

    The following items can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Customizing with the Techstream
      1. Connect the Techstream to the DLC3.
      2. Turn the power switch on (IG).
      3. Turn the Techstream on.
      4. Enter the following menus: Customize Setting / Wireless Door Lock.
      5. Select the setting by referring to the table below.

        Wireless Door Lock 

        Tester Display Description Default Setting ECU
        Wireless Control Function that turns the wireless door lock control system on or off ON 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
        Hazard Answer Back Function that flashes the hazard warning lights once when the doors are locked by wireless operation and twice when the doors are unlocked by wireless operation. ON 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
        Open Door Warning Function that sounds a buzzer when the lock switch is pressed when any of the doors are ajar ON 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
        Unlock 2 Operation Function that unlocks the driver the door when the unlock switch on the electrical key transmitter sub-assembly is pressed once, and unlocks all of the doors when pressed twice. If this setting is OFF, pressing the unlock switch once unlocks all of the doors. ON 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
        Panic Function Function that operates the theft deterrent system by pressing the panic switch on the electrical key transmitter sub-assembly for 0.8 seconds. ON 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
        Auto Lock Time Function that regulates the interval between unlocking and automatic relocking of the doors 60 s 00:30s, 01:60s, 10:120s Main body ECU (Multiplex network body ECU)
        Wireless Auto Lock Function that turns the wireless auto lock function on or off. ON 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
        Wireless Buzzer Resp Function that enables/disables the wireless door lock buzzer response ON 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
        P/W Wireless Ope Buzz Function that enables/disables the wireless power window buzzer response ON 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
        Wireless Buzzer Vol Function that adjusts the wireless door lock buzzer volume Level 5 0000:Level7, 0001:Level6, 0010:Level5, 0011:Level4, 0100:Level3, 0101:Level2, 0110:Level1, 0111:Level0 Main body ECU (Multiplex network body ECU)
        Wireless Lock Function with Doors Open Function that locks the doors automatically if the lock switch on the electrical key transmitter sub-assembly is pressed with any door open and then all of the doors are closed ON 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
    2. Customizing with the multi-display
      1. Turn the power switch on (IG).
      2. Enter the following menus: SETUP / Vehicle / Vehicle Customization / Door Lock Settings. (Type A)
      3. Enter the following menus: APPS / Setup / Vehicle / Vehicle Customization /Door Lock Settings. (Type B)
      4. Enter the following menus: MENU / Settings / Vehicle / Vehicle Customization / Door Lock Settings. (Type C)
      5. Select the setting by referring to the table below.
        Display Description Default Setting Relevant ECU
        Remote 2-Press Unlock Function that unlocks the driver the door when the unlock switch on the electrical key transmitter sub-assembly is pressed once, and unlocks all of the doors when pressed twice. If this setting is OFF, pressing the unlock switch once unlocks all of the doors. On On or Off Main body ECU (Multiplex network body ECU)
        Wireless Lock When Door Opened Function that locks the doors automatically if the lock switch on the electrical key transmitter sub-assembly is pressed with any door open and then all of the doors are closed On On or Off Main body ECU (Multiplex network body ECU)
        Auto Relock Timer Function that regulates the interval between unlocking and automatic relocking of the doors 60 sec. OFF, 30 s, 60 s or 120 s Main body ECU (Multiplex network body ECU)
        Lock/Unlock Feedback-Lights Function that flashes the hazard warning lights once when the doors are locked by wireless operation and twice when the doors are unlocked by wireless operation. On On or Off Main body ECU (Multiplex network body ECU)
        Lock/Unlock Feedback-Tone Function that adjusts the wireless door lock buzzer volume 5 Off, 1, 2, 3, 4, 5, 6 or 7 Main body ECU (Multiplex network body ECU)
scientia non olet · About LEMON Manuals