| Audio Receiver Assembly Communication Stop Mode |
Either condition is met:
- "Display and Navigation (AVN1)" is not displayed on the "CAN Bus Check" screen of the Techstream. Refer to PROBLEM SYMPTOMS TABLE [08/2015 - ]
- Communication system DTCs (DTCs that start with U) that are output correspond to "Audio Receiver Assembly Communication Stop Mode" in "DTC Combination Table". Refer to DIAGNOSIS SYSTEM [08/2015 - ]
|
- Radio and display receiver assembly branch line or connector
- Power source circuit of radio and display receiver assembly
- Radio and display receiver assembly ground circuit
- Radio and display receiver assembly
|