DTC B1796: Sleep Operation Failure of Occupant Classification ECU [08/2015 - ]: Procedure

1. Turn the power switch off.
2. Disconnect the cable from the negative (-) auxiliary battery terminal.
3. Replace the occupant detection ECU. Refer to REMOVAL [08/2015 - ] .
4. Connect the cable to the negative (-) auxiliary battery terminal.

NEXT: Go to next step 

1. Using the Techstream, perform Zero Point Calibration. Refer to INITIALIZATION [08/2015 - ] .

NEXT: Go to next step 

1. Using the Techstream, perform Sensitivity Check. Refer to INITIALIZATION [08/2015 - ] .

NEXT → END