Entry Unlock and Unlatch Functions do not Operate Using Kick Sensor [08/2016 - ]: Procedure
- CHECK CUSTOMIZE SETTING (KICK SENSOR FUNCTION)
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Customize Setting / PSD & PBD operation.PSD & PBD OPERATION
Tester Display Description Default Setting ECU Kick Sensor Function Function that enables/disables the touchless power back door. ON 0:OFF, 1:ON Multiplex network door ECU Result Proceed to The customize setting is "ON" A The customize setting is "OFF" B
Result:
B
PERFORM CUSTOMIZE SETTING. Refer to CUSTOMIZE PARAMETERS [08/2016 - ]
Result:
A
See step 2
- CHECK OPERATION HISTORY
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Smart Key / Utility / Operation History.BODY ELECTRICAL / SMART KEY / UTILITY
Tester Display Operation History AUTO ENTRY WIRELESS OPERATION HISTORYParameter Name Content Kick Sensor Open Request Signal. The multiplex network door ECU receives kick detection signals from the kick door control sensor and sends certification requests to the certification ECU (smart key ECU assembly). If certification is OK, an open permission is sent to the multiplex network door ECU. Result Proceed to Not output A "Kick Sensor Open Request Signal" is output B
Result:
B
GO TO POWER BACK DOOR SYSTEM (Power Back Door cannot be Operated Using Kick Sensor).
Refer to Power Back Door cannot be Operated Using Kick Sensor [08/2016 - ] .
Result:
A
See step 3
- CHECK ENTRY LOCK OPERATION
- While carrying the electrical key transmitter sub-assembly, check that the smart unlock function operates when the back door opener switch is operated.
Refer to OPERATION CHECK [08/2016 - ] .
Result Proceed to Smart lock/smart unlock function does not operate A Smart lock/smart unlock function operates B
Result:
A
GO TO SMART KEY SYSTEM (Back Door Entry Lock and Unlock Functions do not Operate).
Refer to Back Door Entry Lock and Unlock Functions do not Operate [12/2012 - ] .
Result:
B
GO TO POWER BACK DOOR SYSTEM (Power Back Door cannot be Operated Using Kick Sensor).
Refer to Power Back Door cannot be Operated Using Kick Sensor [08/2016 - ] .
- While carrying the electrical key transmitter sub-assembly, check that the smart unlock function operates when the back door opener switch is operated.