DTC C1AA0: Front Camera Module Circuit [10/2015 - ]: Procedure

1. Check if the stored DTCs are current DTCs.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Enter the following menus: Chassis / Front Recognition Camera / Trouble Codes.
5. Check for DTCs.

   Refer to DTC CHECK / CLEAR [10/2015 - ]

   Chassis > Front Recognition Camera > Trouble Codes 

   Result

   Result	Proceed to
   DTC C1AA0 is output.	A
   DTC C1AA0 is not output.	B

Result: 

B 

USE SIMULATION METHOD TO CHECK:  HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - 08/2016]  ,  HOW TO PROCEED WITH TROUBLESHOOTING [08/2016 - 08/2017]  ,  HOW TO PROCEED WITH TROUBLESHOOTING [08/2017 - ] 

Result: 

A 

See step  2

1. Replace the forward recognition camera.

   Refer to REMOVAL [10/2015 - ]

2. Adjust the forward recognition camera.

   Refer to ADJUSTMENT [10/2015 - ]

Result: 

NEXT 

END