Data Signal Circuit between Navigation Receiver Assembly and Stereo Jack Adapter [11/2013 - 10/2015]: Procedure

1. Disconnect the G150 navigation receiver assembly connector.
2. Disconnect the G145 No. 1 stereo jack adapter assembly connector.
3. Measure the resistance according to the value(s) in the table below.

   Standard Resistance

   Tester Connection	Condition	Specified Condition
   G150-2 (UDO-) - G145-2 (UDO-)	Always	Below 1 Ω
   G150-3 (UDO+) - G145-3 (UDO+)	Always	Below 1 Ω
   G150-2 (UDO-) - Body ground	Always	10 kΩ or higher
   G150-3 (UDO+) - Body ground	Always	10 kΩ or higher

   Result	Proceed to
   	OK
   	NG

Result: 

OK 

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE [11/2013 - 10/2015]  . 

Result: 

NG 

REPAIR OR REPLACE HARNESS OR CONNECTOR