DTC B2313: Glass Position Initialization Incomplete [12/2012 - ]: Procedure

1. Initialize the front power window regulator motor assembly LH.

   Refer to INITIALIZATION [12/2012 - 10/2015] or INITIALIZATION [10/2015 - ] .

Result: 

NEXT 

See step  2

1. Turn the ignition switch off.
2. Wait for at least 10 seconds, and then turn the ignition switch to ON.
3. Check for DTCs.

   Refer to DTC CHECK / CLEAR [12/2012 - ] .

   Body Electrical > D-Door Motor > Trouble Codes 

   Result	Proceed to
   	DTC B2313 is not output
   	DTC B2313 is output

Result: 

DTC B2313 is not output 

END (PROBLEM DUE TO INITIALIZATION FAILURE) 

Result: 

DTC B2313 is output 

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH. 

Refer to REMOVAL [12/2012 - 10/2015] or REMOVAL [10/2015 - ] .