Key-off Operation Function Operates even if Operating Conditions are not Satisfied [12/2012 - ]: Procedure
- CHECK MANUAL UP/DOWN FUNCTION
- Check that the manual up and down function using the power window regulator master switch assembly, power window regulator switch assembly, rear power window regulator switch assembly LH or rear power window regulator switch assembly RH can operate the power windows.
Refer to OPERATION CHECK [12/2012 - 10/2015] or OPERATION CHECK [10/2015 - ] .
Result Proceed to Manual up and down function is normal Manual up and down function is not normal
Result:
Manual up and down function is not normal
GO TO OTHER PROBLEM:
Refer to PROBLEM SYMPTOMS TABLE [12/2012 - 10/2015] or PROBLEM SYMPTOMS TABLE [10/2015 - ] .
Result:
Manual up and down function is normal
See step 2
- Check that the manual up and down function using the power window regulator master switch assembly, power window regulator switch assembly, rear power window regulator switch assembly LH or rear power window regulator switch assembly RH can operate the power windows.
- CHECK REMOTE UP/DOWN FUNCTION
- Check that the remote up and down function using the power window regulator master switch assembly can operate all the power windows.
Refer to OPERATION CHECK [12/2012 - 10/2015] or OPERATION CHECK [10/2015 - ] .
Result Proceed to Remote up and down function is normal Remote up and down function is not normal
Result:
Remote up and down function is not normal
GO TO OTHER PROBLEM:
Refer to PROBLEM SYMPTOMS TABLE [12/2012 - 10/2015] or PROBLEM SYMPTOMS TABLE [10/2015 - ] .
Result:
Remote up and down function is normal
See step 3
- Check that the remote up and down function using the power window regulator master switch assembly can operate all the power windows.
- CHECK OPERATION FUNCTION AFTER IGNITION SWITCH IS TURNED OFF
- Check the power window operation function after the ignition switch is turned off.
Result Proceed to Power window can still be operated even after opening driver door or front passenger door within approximately 43 seconds of ignition switch being turned off A Power window can still be operated even after approximately 43 seconds have elapsed after ignition switch is turned off B
Result:
B
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU).
Refer to REMOVAL [12/2012 - ] .
Result:
A
See step 4
- Check the power window operation function after the ignition switch is turned off.
- READ VALUE USING TECHSTREAM
- Read the Data List according to the display on the Techstream.
Refer to DATA LIST / ACTIVE TEST [12/2012 - 10/2015] or DATA LIST / ACTIVE TEST [10/2015 - ] .
Body Electrical > Main Body > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note FR Door Courtesy SW Front door courtesy light switch RH ON or OFF ON: Front door RH open
OFF: Front door RH closed- FL Door Courtesy SW Front door courtesy light switch LH ON or OFF ON: Front door LH open
OFF: Front door LH closed- Body Electrical > Main Body > Data List
Tester Display FR Door Courtesy SW FL Door Courtesy SW OK
On the Techstream screen, ON or OFF is displayed accordingly
Result:
OK
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU).
Refer to REMOVAL [12/2012 - ] .
Result:
NG
GO TO LIGHTING SYSTEM.
- Read the Data List according to the display on the Techstream.