Jam Protection Function does not Operate [12/2012 - ]: Procedure

1. Initialize the front power window regulator motor assembly LH.

   Refer to INITIALIZATION [12/2012 - 10/2015] or INITIALIZATION [10/2015 - ] .

Result: 

NEXT 

See step  2

1. Check if the power window auto up and down function operates normally.

   Refer to OPERATION CHECK [12/2012 - 10/2015] or OPERATION CHECK [10/2015 - ] .

   Result	Proceed to
   	Driver door auto up and down function is normal
   	Driver door auto up and down function is not normal

Result: 

Driver door auto up and down function is not normal 

GO TO OTHER PROBLEM: 

Refer to PROBLEM SYMPTOMS TABLE [12/2012 - 10/2015] or PROBLEM SYMPTOMS TABLE [10/2015 - ] .

Result: 

Driver door auto up and down function is normal 

See step  3

1. Check if the jam protection function operates normally for the driver door power window.

   HINT: 

   The jam protection function will not operate within 4 mm (0.157 in.) of the fully closed position.

   Result	Proceed to
   	Jam protection function operates normally
   	Jam protection function does not operate normally

Result: 

Jam protection function operates normally 

END (PROBLEM DUE TO INITIALIZATION FAILURE) 

Result: 

Jam protection function does not operate normally 

REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH. 

Refer to REMOVAL [12/2012 - 10/2015] or REMOVAL [10/2015 - ] .