DTC Check / Clear

WARNING: This page is about a different car, the 2013 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

CHECK DTC
HINT:

When DTC B1650/32 is stored as a result of troubleshooting for the airbag system, perform troubleshooting for the occupant classification system.
1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.
5. Check the DTCs by following the prompts on the screen.
  HINT:
  
  Refer to the Techstream operator's manual for further details.
CLEAR DTC
1. Connect the Techstream to the DLC3.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.
5. Clear the DTCs by following the prompts on the screen.
  HINT:
  
  Refer to the Techstream operator's manual for further details.