Confirmation Driving Pattern

HINT: 

When clearing the permanent DTCs, refer to the "CLEAR PERMANENT DTC" procedure (Refer to DTC CHECK / CLEAR [08/2016 - 11/2017] ).

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON and turn the Techstream on.
3. Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).
4. Turn the Techstream off.
5. Turn the ignition switch off.
6. Disconnect the Techstream.
7. Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.
8. Connect the cable to the negative (-) battery terminal.
9. Connect the Techstream to the DLC3.
10. Turn the ignition switch to ON and turn the Techstream on.
11. Turn the cruise control main switch on.
12. Wait 16 seconds or more.[*1]

    HINT: 

    [*1] : Normal judgment procedure.

    The normal judgment procedure is used to complete DTC judgment and also used when clearing permanent DTCs.

13. Enter the following menus: Powertrain / Radar Cruise / Trouble Codes.
14. Read the DTCs.

    HINT: 

    • If a DTC is output, the system is malfunctioning.
    • If a DTC is not output, perform the following procedure.
15. If the DTCs are not output, perform a universal trip and check for permanent DTCs (Refer to DTC CHECK / CLEAR [08/2016 - 11/2017] ).

    HINT: 

    • If a permanent DTC is output, the system is malfunctioning.
    • If no permanent DTC is output, the system is normal.