How To Proceed With Troubleshooting [12/2015 - ]: Procedure
- VEHICLE BROUGHT TO WORKSHOP
Result
Proceed to NEXT Result:
NEXT
See step 2
- CUSTOMER PROBLEM ANALYSIS AND SYMPTOM CHECK
Result
Proceed to NEXT Result:
NEXT
See step 3
- INSPECT BATTERY VOLTAGE
Standard Voltage
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
Result
Proceed to NEXT Result:
NEXT
See step 4
- PROBLEM SYMPTOMS TABLE
Result
Result Proceed to Fault is not listed in Problem Symptoms Table A Fault is listed in Problem Symptoms Table B Result:
B
See step 6
Result:
A
See step 5
- OVERALL ANALYSIS AND TROUBLESHOOTING
- Terminals of ECU (Refer to TERMINALS OF ECU [12/2015 - ] )
- Fail-safe chart (Refer to FAIL-SAFE CHART [12/2015 - ] )
- Inspection
- On-vehicle inspection
Result
Proceed to NEXT
Result:
NEXT
See step 6
- ADJUST, REPAIR OR REPLACE
Result
Proceed to NEXT Result:
NEXT
See step 7
- CONFIRMATION TEST
Result
Proceed to NEXT Result:
NEXT
END