Installation [08/2016 - ]: Procedure

HINT: 

Perform "Inspection After Repair" after replacing the mass air flow meter.

Refer to INITIALIZATION [08/2016 - 11/2017] , or refer to INITIALIZATION [11/2017 - ]

1. Install the mass air flow meter to the air cleaner cap sub-assembly with the 2 screws.
   NOTE:

   • If the mass air flow meter has been struck or dropped, replace it.
   • If reusing the mass air flow meter, be sure to inspect the O-ring.
   • Make sure that the O-ring is not cracked or moved out of place when installing the mass air flow meter.
2. Connect the mass air flow meter connector.
3. Engage the wire harness clamp.

1. Perform "Inspection After Repair" after replacing the mass air flow meter.

   Refer to INITIALIZATION [08/2016 - 11/2017] , or refer to INITIALIZATION [11/2017 - ]