LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2017 >> Tacoma TRD Pro, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (2GR-FKS) - Service Information >> Knock Sensor >> Removal [08/2015 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [08/2015 - ]: Procedure

  1. REMOVE INTAKE MANIFOLD 

    (Refer to REMOVAL [08/2015 - 11/2017] , or refer to REMOVAL [11/2017 - ] )

  2. REMOVE KNOCK SENSOR 
    1. Disengage the 2 clamps to separate the sensor wire.
      GTY589684Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the 2 connectors from the 2 knock sensors.
    3. Remove the 2 bolts and 2 knock sensors from the cylinder block sub-assembly.
      GTY589683Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals