LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2017 >> Yaris iA Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System - Diagnostic Codes >> Power Window Control System >> DTC U0452-68: Invalid Data Received From Restraints Control Module Event Information >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U0452-68: Invalid Data Received From Restraints Control Module Event Information: Procedure

  1. VERIFY MAIN BODY ECU DTCS AGAIN 
    1. Clear the DTC for the main body ECU using the Techstream.

      Refer to DTC CHECK / CLEAR

      Body Electrical > Body Control Module > Clear DTCs 

    2. Switch the ignition ON (engine off or on) and wait for 3 s or more.
    3. Retrieve the main body ECU DTCs using the Techstream.

      Refer to DTC CHECK / CLEAR

      Body Electrical > Body Control Module > Trouble Codes 

    4. Is the same DTC displayed?

      Result

      Result
      Yes
      No

    Result:  2

    No 

    See step  5

    Result:  1

    Yes 

    See step  2

  2. VERIFY CENTER AIRBAG SENSOR ASSEMBLY DTCS 
    1. Retrieve the center airbag sensor assembly DTCs using the Techstream.

      Refer to DTC CHECK / CLEAR

      Body Electrical > Restraint Control Module > Trouble Codes 

    2. Are any other DTCs displayed?

      Result

      Result
      Yes
      No

    Result:  2

    Yes 

    REPAIR OR REPLACE THE MALFUNCTIONING PART ACCORDING TO THE APPLICABLE DTC TROUBLESHOOTING. 

    1. Refer to DIAGNOSTIC TROUBLE CODE CHART

    Result:  1

    No 

    See step  3

  3. VERIFY IF MALFUNCTIONING LOCATION IS CENTER AIRBAG SENSOR ASSEMBLY DEPENDING ON REPEATABILITY 
    1. Clear the DTC for the main body ECU using the Techstream.

      Refer to DTC CHECK / CLEAR

      Body Electrical > Body Control Module > Clear DTCs 

    2. Switch the ignition ON (engine off or on) and wait for 3 s or more.
    3. Retrieve the main body ECU DTCs using the Techstream.

      Refer to DTC CHECK / CLEAR

      Body Electrical > Body Control Module > Trouble Codes 

    4. Is the same DTC displayed?

      Result

      Result
      Yes
      No

    Result:  1

    Yes 

    See step  7

    Result:  2

    No 

    See step  5

  4. VERIFY THAT REPAIRS HAVE BEEN COMPLETED 
    1. Clear the DTC for the main body ECU using the Techstream.

      Refer to DTC CHECK / CLEAR

      Body Electrical > Body Control Module > Clear DTCs 

    2. Switch the ignition ON (engine off or on) and wait for 3 s or more.
    3. Retrieve the main body ECU DTCs using the Techstream.

      Refer to DTC CHECK / CLEAR

      Body Electrical > Body Control Module > Trouble Codes 

    4. Is the same DTC displayed?

      Result

      Result
      Yes
      No

    Result:  2

    Yes 

    See step  6

    Result:  1

    No 

    See step  5

  5. VERIFY IF OTHER DTCS DISPLAYED 
    1. Are any other DTCs displayed?

      Result

      Result
      Yes
      No

    Result:  1

    Yes 

    REPAIR OR REPLACE THE MALFUNCTIONING PART ACCORDING TO THE APPLICABLE DTC TROUBLESHOOTING. 

    1. Refer to DIAGNOSTIC TROUBLE CODE CHART

    Result:  2

    No 

    DTC TROUBLESHOOTING COMPLETED. 

  6. REPEAT THE INSPECTION FROM STEP 1. 
    1. If the malfunction recurs, replace the main body ECU.

      Refer to REMOVAL

    2. Go to the next step.

      Result

      Proceed to
      NEXT

    Result:  1

    NEXT 

    See step  5

  7. REPLACE THE CENTER AIRBAG SENSOR ASSEMBLY, THEN GO TO THE NEXT STEP. 
    1. Refer to REMOVAL

      Result

      Proceed to
      NEXT

    Result:  1

    NEXT 

    See step  4