Service Data
| Item | Specification |
|---|---|
| Battery electrolyte specific gravity | 1.22 to 1.29 [20 °C (68 °F)] |
| Battery load test current | 55D23L (60 A*h/20HR): 180 A GR35 (60 A*h/20HR): 180 A N-55 (50 A*h/20HR): 130 A |
| Battery parasitic draw (When the ignition is off, all doors and the bonnet are closed.) | 40 to 65 mA |
| Generator standard voltage [IG-ON] | Terminal 1A: B+ Terminal 2A: Approx. 1 V or less Terminal 2B: Approx. 0 V |
| Generator standard voltage [Idle, 20 °C (68 °F)] | Terminal 1A: 13 to 15 V Terminal 2A: Approx. 3 to 8 V Terminal 2B: Turn the electrical loads (such as headlights, blower motor, rear window defogger, brake lights) on and verify that the voltage reading increases. |
| Generator generated current minimum value | 70% of the nominal output current (nominal output current: 100 A) [Ambient temp. 20 °C (68 °F), voltage 13.0 to 15.0 V, both engine and generator are hot] |
| Generator rotor resistance (between slip rings) [20 °C (68 °F)] | 1.9 to 2.2 ohms |
| Generator brush length | Standard: 22.5 mm (0.886 in) Minimum: 5.0 mm (0.20 in) |
| Generator brush spring force | Standard: 4.1 to 5.3 N (0.42 to 0.54 kgf, 1.0 to 1.1 lbf) Minimum: 1.7 N (0.17 kgf, 0.38 lbf) |