LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2017 >> Yaris iA Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System (Service Information) >> Fuel Injector >> Inspection >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Injector: Inspection: Procedure

  1. INSPECT FUEL INJECTOR 
    1. Resistance Inspection
      1. Disconnect the negative battery cable.

        Refer to REMOVAL

      2. Remove the plug hole plate.

        Refer to REMOVAL

      3. Remove the intake manifold.

        Refer to REMOVAL

      4. Disconnect the fuel injector connector.
      5. Inspect the resistance between fuel injector terminals 1 and 2.
        GTY487338Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        Fuel injector resistance

        1.74 to 2.04 ohms (20 °C (68 °F))

        If not within the specification, replace the fuel injector.

        Refer to REMOVAL 

scientia non olet · About LEMON Manuals