LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2018 >> 4Runner TRD Pro >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge System - Diagnostic Codes & Symptom Tests >> Meter / Gauge System >> DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0129: Lost Communication with Brake System Control Module; DTC U0131: Lost Communication with Power Steering Control Module; DTC U0140: Lost Communication with Body Control Module; DTC U0151: Lost Communication With Restraints Control Module; DTC U0163: Lost Communication With Navigation Control Module; DTC U023A: Lost Communication with Front Camera Module [08/2019 - ] >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0129: Lost Communication with Brake System Control Module; DTC U0131: Lost Communication with Power Steering Control Module; DTC U0140: Lost Communication with Body Control Module; DTC U0151: Lost Communication With Restraints Control Module; DTC U0163: Lost Communication With Navigation Control Module; DTC U023A: Lost Communication with Front Camera Module [08/2019 - ]: Description

The combination meter assembly communicates with each ECU via CAN communication.

DTC Code. Detection Item DTC Detection Condition Trouble Area
U0100 Lost Communication With ECM/PCM "A" Missing Message IG voltage is 9.5 V or higher and the following condition is met:
  1. No communication with the ECM continues for 2 seconds or more.
  • ECM
  • CAN communication system
  • Combination meter assembly
U0129 Lost Communication with Brake System Control Module Missing Message IG voltage is 9.5 V or higher and the following condition is met:
  1. No communication with the skid control ECU continues for 3 seconds or more.
  • Skid control ECU (Master cylinder solenoid)*1
  • Skid control ECU (Brake actuator assembly)*2
  • CAN communication system
  • Combination meter assembly
U0131 Lost Communication with Power Steering Control Module Missing Message IG voltage is 9.5 V or higher and the following condition is met:
  1. No communication with the power steering ECU continues for 3 seconds or more.
  • Power steering ECU assembly
  • CAN communication system
  • Combination meter assembly
U0140 Lost Communication with Body Control Module Missing Message IG voltage is 9.5 V or higher and the following condition is met:
  1. No communication with main body ECU (multiplex network body ECU) continues for 3 seconds or more.
  • Main body ECU (multiplex network body ECU)
  • CAN communication system
  • Combination meter assembly
U0151 Lost Communication with Restraints Control Module Missing Message IG voltage is 9.5 V or higher and the following condition is met:
  1. No communication with the center airbag sensor assembly continues for 10 seconds or more.
  • Center airbag sensor assembly
  • CAN communication system
  • Combination meter assembly
U0163 Lost Communication with Navigation Control Module Missing Message IG voltage is 9.5 V or higher and the following condition is met:
  1. No communication with radio and display receiver assembly continues for 3 seconds or more
  • Radio and display receiver assembly
  • CAN communication system
  • Combination meter assembly
U023A Lost Communication with Front Camera Module Missing Message IG voltage is 9.5 V or higher and the following condition is met:
  1. No communication with forward recognition camera continues for 10 seconds or more.
  • Forward recognition camera
  • CAN communication system
  • Combination meter assembly
  1. *1: for 4WD
  2. *2: for 2WD
scientia non olet · About LEMON Manuals