| Monitor runs whenever the following DTCs are not present |
None |
| Throttle position (Throttle position sensor voltage) |
0.2 V or higher, and less than 2 V |
| Time after engine start |
5 seconds or more |
| Battery voltage |
10.5 V or higher |
| Engine coolant temperature |
70°C (158°F) or higher |
| Estimated load |
30% or more, and less than 70% |
| Mass air flow meter circuit fail (P0102, P0103) |
Not detected |
| Intake air temperature sensor circuit fail (P0112, P0113) |
Not detected |
| Engine coolant temperature sensor circuit fail (P0115, P0117, P0118) |
Not detected |
| Crankshaft position sensor circuit fail (P0335) |
Not detected |
| Throttle position sensor circuit fail (P0120, P0121, P0122, P0123, P0220, P0222, P0223, P2135) |
Not detected |
| Canister pressure sensor circuit fail (P0452, P0453) |
Not detected |
| Leak detection pump fail (P2401, P2402) |
Not detected |
| Vent valve fail (P2419, P2420) |
Not detected |