Data List / Active Test [06/2016 - ]

HINT: 

Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Main Body / Data List.
5. Read the Data List according to the display on the Techstream.
   MAIN BODY
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   Wireless Control	Wireless door lock control function / OFF or ON	Customized setting displayed	-
   Wireless Buzzer Resp	Wireless buzzer response / OFF or ON	Customized setting displayed	-
   Hazard Answer Back	Hazard answer-back of wireless / OFF or ON	Customized setting displayed	-
   Open Door Warning	Open door warning / OFF or ON	Customized setting displayed	-
   Unlock 2 Operation	2 times operation of wireless unlock / OFF or ON	Customized setting displayed	-
   Panic Function	Panic function / OFF or ON	Customized setting displayed	-
   Wireless Auto Lock	Automatic lock function / OFF or ON	Customized setting displayed	-
   Auto Lock Time	Automatic lock time / 30 s, 60 s or 120 s	Customized setting displayed	-
   Trunk Lid Operation	Opening the luggage compartment door by the door control transmitter module set sub-assembly/ 1 tim ON, 2 tim ON, Long1 or Long2	Customized setting displayed	-
   Wireless Buzzer Vol	Wireless door lock buzzer volume/Level7, Level6, Level5, Level4, Level3, Level2, Level1 or Level0	Customized setting displayed	-
   Detection of Vehicle	Detection of vehicle function OFF or ON	Customized setting displayed	-
   D Door Courtesy SW	Driver side door courtesy light switch signal / ON or OFF	ON: Driver side door opened OFF: Driver side door closed	-
   P Door Courtesy SW	Passenger side door courtesy light switch signal / ON or OFF	ON: Passenger side door opened OFF: Passenger side door closed	-
   Luggage Courtesy SW	Luggage compartment door courtesy switch signal / OFF or ON	ON: Luggage compartment door is open OFF: Luggage compartment door is closed	-
   IG SW	Ignition switch IG signal / ON or OFF	ON: Ignition switch ON OFF: Ignition switch off	-
   ACC SW	Ignition switch ACC signal / ON or OFF	ON: Ignition switch ACC OFF: Ignition switch off	-
   Key Unlock Warning SW	Unlock warning switch / OFF or ON	OFF: Ignition key is not inserted ON: Ignition key is inserted	-
   Hazard Output	Hazard warning light output / OFF or ON	OFF: Not during hazard answer-back operation ON: During hazard answer-back operation	-
   Wireless Buzzer Output	Wireless door lock buzzer output / OFF or ON	OFF: Not during wireless door lock buzzer answer-back operation ON: During wireless door lock buzzer answer-back operation	-

HINT: 

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Main Body / Active Test.
5. Perform the Active Test according to the display on the Techstream.