DTC P0101: Mass Air Flow Circuit Range / Performance Problem [06/2016 - 07/2018]: Procedure
- CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0101)
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Enter the following menus: Powertrain / Engine / Trouble Codes.
- Read DTCs.RESULT
Result Proceed to DTC P0101 is output A DTC P0101 and other DTCs are output B HINT:
If any DTCs other than P0101 are output, troubleshoot those DTCs first.
Result:
B
GO TO DTC CHART
(Refer to DIAGNOSTIC TROUBLE CODE CHART [06/2016 - 03/2017] , or refer to DIAGNOSTIC TROUBLE CODE CHART [03/2017 - 07/2018] )
Result:
A
See step 2
- CHECK INTAKE SYSTEM
- Check the intake system for vacuum leaks (Refer to ON-VEHICLE INSPECTION [06/2016 - ]
).
OK
No leaks from intake system.
Result:
NG
REPAIR OR REPLACE INTAKE SYSTEM
Result:
OK
See step 3
- Check the intake system for vacuum leaks (Refer to ON-VEHICLE INSPECTION [06/2016 - ]
).
- CHECK PCV HOSE CONNECTIONS
- Check the PCV hose connections (Refer to ON-VEHICLE INSPECTION [06/2016 - ]
).
OK
PCV valve and hose are connected correctly and are not damaged.
Result:
NG
REPAIR OR REPLACE PCV HOSE
Result:
OK
See step 4
- Check the PCV hose connections (Refer to ON-VEHICLE INSPECTION [06/2016 - ]
).
- REPLACE MASS AIR FLOW METER
- Replace the mass air flow meter (Refer to REMOVAL [06/2016 - ] ).
Result:
NEXT
See step 5
- CONFIRM WHETHER MALFUNCTION HAS BEEN SUCCESSFULLY REPAIRED
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Clear the DTCs (Refer to DTC CHECK / CLEAR [06/2016 - ] ).
- Turn the ignition switch off and wait for at least 30 seconds.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Start the engine and warm it up.
- Drive the vehicle in accordance with the driving pattern described in Confirmation Driving Pattern.
- Enter the following menus: Powertrain / Engine / Utility / All Readiness.
- Input the DTC: P0101.
- Check the DTC judgment.RESULT
Techstream Display Description NORMAL - DTC judgment completed
- System normal
ABNORMAL - DTC judgment completed
- System abnormal
INCOMPLETE - DTC judgment not completed
- Perform driving pattern after confirming DTC enabling conditions
N/A - Unable to perform DTC judgment
- Number of DTCs which do not fulfill DTC preconditions has reached ECU memory limit
Result:
NEXT
END