DTC P0116: Engine Coolant Temperature Circuit Range / Performance Problem [07/2018 - ]: Procedure
- CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0116)
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Enter the following menus: Powertrain / Engine / Trouble Codes.
- Read DTCs.RESULT
Result Proceed to DTC P0116 is output A DTC P0116 and other DTCs are output B HINT:
If any DTCs and other than P0116 are output, troubleshoot those DTCs first.
Result:
B
GO TO DTC CHART
(Refer to DIAGNOSTIC TROUBLE CODE CHART [07/2018 - ] )
Result:
A
See step 2
- INSPECT THERMOSTAT
- Inspect the thermostat (thermostat opening temperature) (Refer to INSPECTION [06/2016 - ] ).
Result:
OK
REPLACE ENGINE COOLANT TEMPERATURE SENSOR
(Refer to REMOVAL [06/2016 - ] )
Result:
NG
REPLACE THERMOSTAT
(Refer to REMOVAL [06/2016 - ] )