Problem Symptoms Table [08/2013 - ]
HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
- If the problem only occurs in certain locations or at certain times of day, check for wave interference.
- If optional components are installed, check for wave interference from the components.
IMMOBILIZER SYSTEM (W/ SMART KEY SYSTEM)
| Symptom | Suspected Area | Link |
|---|---|---|
| Security indicator light does not blink | Proceed to "Security Indicator Light Does not Blink" | Refer to Security Indicator Light Does not Blink [08/2013 - 08/2016] Refer to Security Indicator Light Does not Blink [08/2016 - 08/2017] Refer to Security Indicator Light Does not Blink [08/2017 - ] |
| Engine cannot be started*1 | ID code box ECU (Immobilizer code ECU) | Refer to PROBLEM SYMPTOMS TABLE [08/2013 - ] |
| ECM | - | |
| SFI system | - | |
| Power source mode cannot be changed*1 | Engine switch | Refer to DIAGNOSIS SYSTEM [08/2013 - ] |
| Certification ECU (Smart key ECU assembly) | - | |
| Steering lock lock/unlock not possible*2 | Steering lock ECU (Steering lock actuator assembly) | Refer to DIAGNOSIS SYSTEM [08/2013 - ] |
- *1: Refer to Problem Symptoms Table for Smart Key System (for Start Function).
- *2: Refer to Problem Symptoms Table for Steering Lock System.