Customize Parameters [04/2014 - 08/2017]
- CUSTOMIZE SEAT BELT WARNING SYSTEM (w/ Occupant Classification System)
HINT:
The following items can be customized.
NOTE:- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
- These buzzers should be on for safe driving. Perform this procedure only if it is necessary to set the buzzer to off (disabled).
- Customizing with the Techstream
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Enter the following menus: Customize Setting / Warning.
- Select the setting by referring to the table below.
Warning
Tester Display Description Default Setting ECU Driver Side Seatbelt Warning Buzzer Function to sound the driver seat belt warning buzzer ON 0:OFF, 1:ON Combination meter assembly Front Passenger Side Seatbelt Warning Buzzer Function to sound the front passenger seat belt warning buzzer ON 0:OFF, 1:ON Combination meter assembly HINT:
This setting is only valid when the vehicle is driven at 20 km/h (12 mph) or more.