LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2018 >> Corolla SE, Automatic CVT Trans >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column (Service Information) (Model Code: ZRE172) >> Steering Pad Switch >> Removal [08/2013 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [08/2013 - ]: Procedure

  1. REMOVE HORN BUTTON ASSEMBLY 

    Refer to REMOVAL [08/2013 - ]

  2. REMOVE STEERING PAD SWITCH ASSEMBLY 
    1. Disconnect the steering pad switch connector from the spiral cable sub-assembly.
    2. w/ Shift Paddle Switch:
      1. Disengage the steering pad switch connector clamp from the steering wheel assembly.
        GTY438532Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *1 No. 1 Switch Wire
      2. Disconnect the No. 1 switch wire.
    3. Remove the 2 screws.
      GTY440212Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Pin
      *b Guide
    4. Disengage the 4 claws, 2 pins and 2 guides to remove the steering pad switch assembly from the steering wheel assembly.
scientia non olet · About LEMON Manuals