DTC Check / Clear [12/2015 - 11/2017]

CHECK DTC
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Pre-Collision / Trouble Codes.
5. Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes.
6. Check the details of the DTC(s) (Refer to DIAGNOSTIC TROUBLE CODE CHART [12/2015 - 11/2017] ).
HINT:

As the driving support ECU and seat belt control ECU output DTCs for the pre-collision system, be sure to check the Pre-Collision and Pre-Collision 2 DTCs.
CLEAR DTC
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Enter the following menus: Body Electrical / Pre-Collision / Trouble Codes.
5. Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes.
6. Clear the DTCs.
HINT:

As the driving support ECU and seat belt control ECU output DTCs for the pre-collision system, be sure to clear the Pre-Collision and Pre-Collision 2 DTCs.