Customize Parameters [08/2015 - ]: Procedure
- CUSTOMIZE POWER WINDOW CONTROL SYSTEM
HINT:
The following items can be customized.
NOTE:- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
- Customizing with the Techstream
- Connect the Techstream to the DLC3.
- Turn the ignition switch to ON.
- Turn the Techstream on.
- Enter the following menus: Customize Setting / Power Window.
- Select the setting by referring to the table below.
Display Default Content Setting Relevant ECU D Window Auto Up ON This function is used to enable or disable the auto up function for the driver door window using the multiplex network master switch assembly. OFF or ON Front power window regulator motor assembly LH P Window Auto Up ON This function is used to enable or disable the auto up function for the front passenger side window using the front power window regulator switch assembly RH. OFF or ON Front power window regulator motor assembly RH P Window Auto Up From Driver ON This function is used to enable or disable the remote auto up function for the front passenger side window using the multiplex network master switch. OFF or ON Front power window regulator motor assembly RH D Window Auto Down ON This function is used to enable or disable the auto down function for the driver door window using the multiplex network master switch assembly. OFF or ON Front power window regulator motor assembly LH P Window Auto Down ON This function is used to enable or disable the auto down function for the front passenger side window using the front power window regulator switch assembly RH. OFF or ON Front power window regulator motor assembly RH P Window Auto Down From Driver ON This function is used to enable or disable the remote auto down function for the front passenger side window using the multiplex network master switch. OFF or ON Front power window regulator motor assembly RH