LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2018 >> Tacoma TRD Pro, Standard Trans >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System - Diagnostics - Introduction >> Pre-Collision System >> DTC Check / Clear [11/2017 - ] >> DTC Check / Clear [11/2017 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [11/2017 - ]

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes.
    5. Check for DTCs.

      Refer to DIAGNOSTIC TROUBLE CODE CHART [11/2017 - 09/2019] , or refer to DIAGNOSTIC TROUBLE CODE CHART [09/2019 - ] 

  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Body Electrical / Pre-Collision 2 / Clear DTCs.
    5. Clear the DTCs.

      Refer to DIAGNOSTIC TROUBLE CODE CHART [11/2017 - 09/2019] , or refer to DIAGNOSTIC TROUBLE CODE CHART [09/2019 - ] 

scientia non olet · About LEMON Manuals