DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0122: Lost Communication with Vehicle Dynamics Control Module; DTC U0416: Invalid Data Received from Vehicle Dynamics Control Module [06/2016 - ]: Procedure

CHECK FOR DTC (CAN COMMUNICATION SYSTEM)
1. Clear the DTC(s) (Refer to DTC CHECK / CLEAR [06/2016 - ] ).
2. Check for DTCs (Refer to DTC CHECK / CLEAR [06/2016 - ] ).
  OK
  
  DTC is not output.
Result:

OK

USE SIMULATION METHOD TO CHECK

(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2016 - 03/2017] Refer to HOW TO PROCEED WITH TROUBLESHOOTING [03/2017 - ] )

Result:

NG

GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)

(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [06/2016 - 03/2017] Refer to HOW TO PROCEED WITH TROUBLESHOOTING [03/2017 - ] )