LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2019 >> 86 Base, Automatic Trans >> Repair and Diagnosis >> Steering >> Steering Column >> Steering Column (Service Information) >> Steering Pad Switch >> Installation [06/2016 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation [06/2016 - ]: Procedure

  1. INSTALL STEERING PAD SWITCH ASSEMBLY 
    1. Engage the 4 claws to install the steering pad switch assembly.
    2. Install the 2 screws.

      Torque: 1.75 N*m (18 kgf*cm, 15 in.*lbf) 

    3. Connect the cruise control main switch wire connector to the cruise control main switch assembly.
    4. Engage the clamp.
    5. Pass the wire harness over the 2 guides.
    6. Connect the steering pad switch connector to the spiral cable sub-assembly.
  2. INSTALL HORN BUTTON ASSEMBLY 

    Refer to INSTALLATION [06/2016 - ]

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 

    Torque: 6.0 N*m (61 kgf*cm, 53 in.*lbf) 

  4. INSPECT SRS WARNING LIGHT 

    Refer to DIAGNOSIS SYSTEM [06/2016 - ]

scientia non olet · About LEMON Manuals